older version V 4.19
Latest software version on Nokia 1611: V 4.03 NHE-5SX
-------------------------------------------------------------------------------------------------------------------------------
2. Nokia 2010
To view IMEI number *#06#
To view Software Version enter *#9999#
-------------------------------------------------------------------------------------------------------------------------------
3. Nokia 101 cell phone lockcode
Nokia 101 cell phones set up by Bell Mobility in Toronto can have their

 lock code
circumvented by the following method:
Type: * 3001 # 12345 [STO] 00
Wait for: NOT DONE
Type: [RCL] 01
Clear old lock code (the last four digits) and enter a new lock code. Be very careful
not to delete other characters.
Type: [STO] 01 [STO]
Turn power off. 4.
--------------------------------------------------------------------------------------------------------------------------------------------------------
Nokia 2110i
*#06# for checking the IMEI (International Mobile Equipment Identity) Information
you get from the IMEI:
XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare
To view Week and Year of manufacture enter *#3283# [*# D A T E #]
The last two digits are the year. If the year is 95, the first two digits are

the month. For
96 the first two digits are the week of the year.
To view the software version on 2110e / 2110i enter *#170602112302#

 or *#9999#
On newer phones, the code has been changed to *#682371158412125#
Service Prover Lock:
The service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once
the cell phone is locked to a specific operator, if one inserts a SIM card from a different
operator the phone will refuse to accept it! The cell phone will however accept another
SIM card from the same operator.
All Nokia phones (2110 and newer) have four different SIM locks which

can be used to
lock the phone for upto 4 different providers. But most phones with restriction only have
one lock activated. ( lock 1)
The main code used in Nokia phones is:
#pw+(master code)+Y#
This code is able to check, activate or remove Sim card restriction (SP-lock).
Use the * key to get the p, + and w chars.
'Y' has to be 1,2,3 or 4 - depending of what lock you what to deal with.
#pw+1234567890+1# for Provider-Lock status
#pw+1234567890+2# for Network-Lock status
#pw+1234567890+3# for Country-Lock status
#pw+1234567890+4# for SimCard-Lock status
# = DOUBLE-CROSS
W = PRESS "*" THREE TIMES
P = PRESS "*" FOUR TIMES
+ = PRESS "*" TWO TIMES
MASTERCODE = 1234567890
Y = NUMBER 1 TO 4
-------------------------------------------------------------------------------------------------------------------------------
4. 2110i (continue)
(master code) is a 10 digit code, based on the phones IMEI number.
(I can NOT give you the master code - SO DON'T ASK ME FOR IT !!!!!!!)
Eg. To remove restriction on lock 1 type following code:
#pw+(master code)+1#
If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code)
eg. To check if phone if restricted on lock 1 type the following code:
#pw+1234567890+1#
Please NOTE that these codes could be used with care! A user told me

that it's only possible
to type in about 3 different codes on each lock! Then something bad will happen ..therefore
be careful!
Bypass the SP lock
With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIMlocked to one privider you can bypass
the SP lock like this:
1: Insert sim card of diferent provider.
2: Turn on the phone and press the UP VOLUME key for 3 sec. then

release it and the phone
says PIN CODE?
3: Press the "C" key.
4: Then Press * and wait until it desapear and apear again, then press * one more time and 04*PIN*PIN*PIN#
The phone now says: PIN CODE CHANGED (or ACCEPTED) and the SIM card is accepted
until you restart the phone again. NOTE: On version 5.04 Nokia has removed this option !
Cell-sites:
To enable display of cell-site names, [MENU] 4 9 1
Received calls:
To see received calls. Same As menu options (012)
Enter : * then Memory then Find or * then the down arrow Missed calls
To see missed calls:
Same as menu option (01 3)
Enter : + then Memory then Find or + then the down arrow
DTMF tones:
Pressing Menu, then Green Phonebutton allows you to transmitt DTMF

tones
Carkit Programming:
If you use a carkit with handsfree AND additional handset, and you want

to switch from handset
to handsfree: Press the left menu button, and put the additional handset

on hook. Now you are on handsfree
-------------------------------------------------------------------------------------------------------------------------------
5. Nokia 2160
The Nokia 2160 series hand portable CMT uses an EEPROM NAM that can be programmed
directly from the standard user keypad. In order to access the NAM, you must enter the special
access code currently programmed into the phone. Once the programming mode is accessed, NAM
parameters are loaded by entering them into the display and "storing" them to selected memory locations.
Be sure to obtain all parameters before proceeding.
EASY NAM PROGRAMMING:
1. Turn on phone.
2. Enter the Easy NAM access code. Access code is: *#639#
3. Verify the display now reads "Cellular Number" and enter the 10 digit MIN for the phone.
4. Press the softkey under the word "OK" in the display. If less than 10 digits are entered an error
message will prompt you to reenter the number.
5. Verify the display reads "Enter code" and enter the five digit SID followed by four zeros.
(Example 001750000 is a SID of 175 followed by four zeros). An error message will display if an
incorrect entry is made. Do not add more than four zeros to the code.
Note: Change the Lock code by adding a pound sign and new lock code after the code.
(Example: 001750000#7788. Lock code = 7788).
Change the Language code by adding a pound sign (#) and new language code after the code.
(Example: 001750000#2. Language = 2)
Language Code: 0 (default) = English, 1 = French, 2 = Spanish, 3 = Portuguese
Change the Lock code and Language code by separating each set of numbers by a pound sign.
(Example: 001750000#7788#2). The SID = 00175, Lock code = 7788, Language = 2 (Spanish).
6. Press the softkey under the word "OK" in the display.
7. The display will tell you that the activation was OK and instruct you to power the phone off, then on again.
When the phone powers back up, it will automatically select the correct system (A or B).